Helix/HX Firmware 3.80

New Amps

4x10 US Super, captured from* the Fender Super Reverb
4x12 Cartog Guv, captured from Ben Adrian's Cartographer cabinet (Modified Lee Jackson 4x12 with Eminence Governor speakers)
4x12 Cartog C90, captured from Ben Adrian's Cartographer cabinet (Modified Lee Jackson 4x12 with Mesa C90 speakers)
4x12 SoloLead EM, captured from* the Soldano SLO 4x12 cabinet

Wah > Teardrop Bass Q (Mono, Stereo), Line 6 Original, based on the Dunlop 105Q
- Position—Sets the position of the wah's pedal position. By default, this is assigned to Expression Pedal 1. You may set the Min and Max value parameters to set the wah's frequency sweep range from the Controller Assign menu
- Q Trim—Controls the Q or bandwidth of the effect. Lower values boost a wider frequency band and higher values boost a narrower frequency band
- Vol Trim—Emulates the actual pedal's side volume trim knob
- Mix—Controls the wet/dry mix of the wah effect. When set to 0%, no wah effect is heard; when set to 100%, no dry signal is heard
- Level—Sets the overall (transparent) level of the block

HX One only: The On/Off footswitch state is now saved with the preset
HX One only: You can now view the preset name instead of the model name in the Home view. Configure this in the new Global > Display setting:
- Auto (default): Displays the preset name by default. When scrolling through models using the effect encoder, the model name appears and persists for 3 seconds after the last adjustment before reverting to the preset name. When editing model parameters, the preset name briefly switches to the model name, persisting for 3 seconds after the last edit before returning to the preset name
- Model: Always displays the model name
- Preset: Always displays the preset name.
HX One only: Added support for MIDI control of the Shuffling Looper
HX One only: Introduced a new MIDI command for preset navigation (CC72):
- CC72, value 0-63: Previous preset
- CC72, value 64-127: Next preset
HX One only: The chromatic tuner is now available when HX One is set to True Bypass

Delay > Cosmos Echo would apply the same wow/flutter modulation to the left and right delays, making it appear in certain cases as though the Spread control was inoperable—FIXED
If you let your Helix/HX box sit, doing nothing for many hours, certain delay and modulation effects could stop processing audio until the preset was reloaded—FIXED
Delay > Poly Sustain could sometimes exhibit glitching audio if Random or Random Speed knobs were maxed out—FIXED
If the Amp > Ampeg B-15NF's Bass parameter was set to 10.0, the model could gradually lose volume over the course of 30 minutes or so—FIXED
If the Amp > Mandarin Bass 200's Bass parameter was set to 0.0, the model could lose volume over the course of 30 minutes or so—FIXED
HX Stomp/XL only: In certain configurations, output USB 5/6 would not always mirror the instrument input—FIXED
HX One only: There was an issue with Looper > Shuffling Looper when exiting the preset list by pressing both footswitches—FIXED
HX One only: Stereo models could collapse to mono when the insert position was set to Post—FIXED
HX One only: Looper undo/redo states could become reversed when controlled via MIDI—FIXED
HX One only: Certain Delay effects could result in glitches when receiving MIDI Clock changes while Note sync is disabled—FIXED
HX One only: In some cases, Flux Min and Max values may not update after resetting the parameter to its default—FIXED
Other minor fixes and improvements

There is a known issue in HX Edit 3.80 on Apple silicon computers (M1, M2, M3, M4) where some global settings are not properly restored from a backup file. A hotfix for this issue will be released shortly. Windows and Intel Apple computers are not affected by this issue.