Reset Options

To use Reset Options:

  • Power off the device
  • Hold the desired button combination
  • Power on the device
  • Release the button combination

Please note: Buttons are numbered from top left to bottom right.

Helix Floor/LT

Button CombinationDescription
2LED light Fun
3 & 4Test Mode
5 & 6Global reset
7 & 8Reset setlists to factory, Keep IRs
8 & 9Reset setlists to factory, Clear IRs
9 & 10Reset setlists to factory, Global reset, Clear IRs
10 & 11Upgrades existing presets to latest format
11 & 12Clear current preset
5 & 12Clear setlists, clear IRs, Return system settings to default
6 & 12Safe boot mode

Helix Rack

Since the rack doesn't have footswitches, you'll instead hold down a combination of the 6 encoders that are below the main LCD screen as you're booting up.

Button CombinationDescription
ENC2 & ENC3Reset globals
ENC3 & ENC4Restore stock presets and setlists
ENC4 & ENC5Restore stock presets, setlists, and IRs
ENC5 & ENC6Reset globals and restore presets, setlists, and IRs (entire factory restore)
ENC1 & ENC3Rebuild all presets
ENC1 & ENC5Clear all presets, setlists, and IRs
ENC1 & ENC6Will enter Update Mode (This feature is only available on firmware v1.06.5 and higher)

HX Effects

Button CombinationDescription
Holding FS3 + MODEWill clear all Presets and IRs
Holding FS4+FS5Will reset Global Settings
Holding FS5+FS6Will reset Presets only
Holding FS6+TAPWill Perform factory restore (reset, Globals, IRs, and Presets)
Holding the right arrow ">"Will put the unit in a fail safe update mode. Use this when the HX Effects is in an un-recoverable state

HX Stomp

Button CombinationDescription
All 3 FootswitchesClears all presets/IRs
FS1+2Resets presets and IRs
FS 2+3Factory restore (globals, presets, IRs)

HX Stomp XL

Button CombinationDescription
Nothing here yet. If you have this information, please contact us.

Last updated: March 7, 2021